3. Load paper into the tray.
NOTE: To prevent jams, do not overll the tray.
Be sure that the top of the stack is below the tray
full indicator.
NOTE: If the tray is not adjusted correctly, an
error message might appear during printing or the
paper might jam.
4. Close the tray.
5. The tray conguration message displays on the
printer control panel.
6. Touch the OK button to accept the detected type
and size, or touch the Modify button to choose a
dierent paper size or type.
7. Select the correct type and size, and then touch
the OK button.
ENWW Load the 2,100-sheet high-capacity input tray 31
To Next Page
Loading...