Load paper to Trays 2, 3, 4, and 5
Introduction
The following information describes how to load paper in Tray 2 and the optional 550-sheet trays (part
number F2A72A). These trays hold up to 550 sheets of 75 g/m
2
(20 lb) paper.
NOTE: The procedure to load paper for the 550-sheet trays is the same as for Tray 2. Only Tray 2 is shown
here.
CAUTION: Do not extend more than one paper tray at a time.
1. Open the tra
y.
NOTE: Do not open this tray while it is in use.
2
. Be
fore loading paper, adjust the paper-width
guide
s by squeezing the adjustment latches and
sliding the guides to the size of the paper being
used.
3. Adjust the paper-length guide by squeezing the
adjus
tment latch and sliding the guide to the size
of the paper being used.
To Next Page
Loading...