3. Remove any visible lint or dust from each of the
feed rollers and the separation pad using
compressed air or a clean lint-free cloth
moistened with warm water.
4. Close the document-feeder cover.
NOTE: Verify that the latch on the top of the
document-f
eeder cover is completely closed.
If the problem persists, check the document feeder separation pad and rollers for damage or wear, and
replac
e them if necessary.
NOTE: New rollers have a rough surface. As rollers wear, they become smooth.
ENWW Printer does not pick up paper or misfeeds 153
To Next Page
Loading...