Media that can damage the device
In rare circumstances media can damage the device. Avoid the following types of media to prevent
possible damage:
●
Do not use media with staples or paper clips attached.
●
Do not use transparencies designed for inkjet printers or other low-temperature printers. Use only
transparencies that are specified for use with HP LaserJet devices.
●
Do not use photo paper intended for inkjet printers.
●
Do not use paper that is embossed or coated and is not designed for the temperature of the image-
fuser. Select media that can tolerate temperatures of 200°C (392°F) for 0.1 second.
HP manufactures a media that is designed for the device.
●
Do not use letterhead paper that was produced with low-temperature dyes or thermography.
Preprinted forms or letterhead must use inks that can tolerate temperatures of 200°C (392°F) for
0.1 second.
●
Do not use any media that produces emissions, or that melts, offsets, or discolors when exposed
to 200°C (392°F) for 0.1 second.
To order HP LaserJet printing supplies, go to
www.hp.com/go/ljsupplies in the U.S. or to www.hp.com/
ghp/buyonline.html/ worldwide.
ENWW Choosing paper and other media 7
To Next Page
Loading...