Problem-solving tools
The section describes the tools that can help you solve problems with your device.
Restoring the factory-set defaults
Restoring the factory-set defaults returns all of the settings to the factory defaults.
CAUTION: This procedure deletes any pages that are stored in the memory. The procedure then
automatically restarts the device.
1. On the device control panel, press Menu/Enter.
2. Use the < or the > button to select Service, and then press Menu/Enter.
3. Use the < or the > button to select Restore defaults, and then press Menu/Enter.
The device automatically restarts.
Reducing paper curl
Use the Less paper curl setting to reduce curl in printed media.
1. On the device control panel, press Menu/Enter.
2. Use the < or the > button to select Service, and then press Menu/Enter.
3. Use the < or the > button to select Less paper curl, and then press Menu/Enter.
4. Use the < or the > button to select On, and then press Menu/Enter.
100 Chapter 9 Problem solving ENWW
To Next Page
Loading...