Guidelines for repacking the device
Use the following guidelines when repacking the device:
●
If possible, include print samples and 5 to 10 sheets of paper or other media that did not print
correctly.
●
Remove and keep any cables, trays, and optional accessories installed in the printer.
●
Remove and keep the print cartridge.
CAUTION: To prevent damage to the print cartridge, store the print cartridge in its original packing
material, or store it so that it is not exposed to light.
●
If possible, use the original shipping container and packing material. Shipping damage as a result
of inadequate packing is your responsibility. If you have already disposed of the device packing
material, contact a local mailing service for information on repacking the device.
●
Hewlett-Packard recommends that you insure the equipment for shipment.
110 Appendix B Service and support ENWW
To Next Page
Loading...