HP LaserJet M1005 - Multifunction Printer

Copying two-sided documents
Copying a two-sided original to a one-sided document
Copies resulting from these procedures are printed on one side, and need to be hand-collated.
1. Load the first page of the document to be copied face-down onto the flatbed scanner, and then
close the scanner lid.
2. Press Start Copy.
3. Flip the page on the scanner to the second side, and then close the scanner lid.
4. Press Start Copy.
5. Repeat steps 1 through 4 for each page until all of the original document pages have been copied.
Copying a two-sided original to a two-sided document
1. Load the first page of the document to be copied face-down onto the flatbed scanner, and then
close the scanner lid.
2. Press Start Copy.
3. Flip the page on the scanner to the second side, and then close the scanner lid.
4. Remove the copied page from the output bin and place it face down into the priority input tray with
the top edge feeding into the device first.
5. Press Start Copy.
50 Chapter 6 Copy ENWW