HP LaserJet M1120 - Multifunction Printer User Manual

Site preparations
Operating environment
Place the product on a sturdy, level surface in a well-ventilated area. Make sure that the air vents are
not blocked and that the product is installed away from direct sunlight, open flames, and ammonia fumes.
Store or install the product in an area that meets the following requirements:
●
Temperature (printer; operating) 15
o
to 32.5
o
C (59
o
to 90.5
o
F)
●
Temperature (printer; storage) -20
o
to 60
o
C (-4
o
to 140
o
F)
●
Humidity (printer; operating) 10% to 80% relative humidity (no condensation)
●
Humidity (printer; storage) 10% to 90% relative humidity (no condensation)
●
Temperature (toner cartridge; storage) -20
o
to 40
o
C (-4
o
to 104
o
F)
●
Humidity (toner cartridge; storage) 10% to 90% relative humidity (no condensation)
16 Chapter 2 Installation ENWW

HP LaserJet M1120 - Multifunction Printer Specifications

General

Print Technology	Laser
Scanner Type	Flatbed
Scan Input Colour Depth	24-bit
Functions	Print, Copy, Scan
Print Speed	19 ppm
Connectivity	USB 2.0
Media Sizes Supported	A4, A5, A6, B5, Envelopes
Time to First Page	8.5 sec
Copy Speed	19 cpm
Maximum Number of Copies	99 copies
Maximum Scan Area	21.6 x 29.7 cm
Standard Input Capacity	150 sheets
Standard Output Capacity	100 sheets
Power Consumption (typical)	370 W
Supported Operating Systems	Mac OS
Scan Resolution	Up to 1200 dpi (color and monochrome, flatbed)