PCL 5e
Use the PCL 5 options to configure the settings when you are using the PCL 5 print personality. These
are the same options that are available on the PCL5 menu on the control panel.
NOTE: You must click Apply before the changes take effect.
PostScript
Use the PostScript option when you are using the HP postscript level 3 emulation print personality. When
the Print PostScript error option is turned on, the PostScript error page automatically prints when
HP postscript level 3 emulation errors occur.
NOTE: You must click Apply before the changes take effect.
Network Settings
The network administrator can use the HP ToolboxFX Network Settings tab to control the network-
related settings for the product when it is connected to an IP-based network.
150 Chapter 11 Manage and maintain the product ENWW
To Next Page
Loading...