Bezel and control panel
1. Gently pry up on the corner of the control-panel bezel, and then carefully lift it up and off of the
control panel to remove it.
NOTE: If you are only replacing the bezel, you can disregard the remaining steps in this
procedure. Use the following steps if you are also replacing the control panel.
Figure 5-38 Remove the bezel and control panel (1 of 4)
2. Remove one screw (callout 1).
Figure 5-39 Remove the bezel and control panel (2 of 4)
1
ENWW Bezel and control panel 119
To Next Page
Loading...