4. Remove four screws (callout 6).
Figure 5-36 Remove the scanner/ADF assembly (3 of 4)
6
5. Slide the scanner/ADF assembly toward the front of the base unit, and then lift it up to remove it.
WARNING! The scanner cover (which contains the ADF assembly) is not captive when the
scanner assembly is removed. The scanner cover can suddenly open and be damaged when you
are handling the scanner assembly. You must keep the scanner assembly level to make sure that
the scanner cover (ADF assembly) does not open.
CAUTION: Make sure that you carefully pass the scanner wire harnesses through the opening
in the top cover. The connectors can be damaged if they become caught on the top cover.
Figure 5-37 Remove the scanner/ADF assembly (4 of 4)
118 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...