2. Rotate the green pressure-release levers downward.
3. Open tray 2 and optional tray 3.
4. With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the product.
5. If no media is visible, open the print-cartridge door, remove the print cartridge, and then rotate the
upper media guide. Carefully pull the media up and out of the product. Replace the print cartridge.
6. Close tray 2 and optional tray 3.
7. Close the rear output door.
ENWW Clear jams 183
To Next Page
Loading...