Table 1-4 Supported envelopes and postcards
Size Dimensions Tray 1 Trays 2 and 3
Envelope #10 105 x 241 mm (4.13 x 9.49 inches) Not supported.
Envelope DL 110 x 220 mm (4.33 x 8.66 inches) Not supported.
Envelope C5 162 x 229 mm (6.93 x 9.84 inches) Not supported.
Envelope B5 176 x 250 mm (6.7 x 9.8 inches) Not supported.
Envelope Monarch 98 x 191 mm (3.9 x 7.5 inches) Not supported.
Postcard 100 x 148 mm (3.94 x 5.83 inches) Not supported.
Double postcard 148 x 200 mm (5.83 x 7.87 inches) Not supported.
Table 1-5 ADF
Media Dimensions Weight Capacity
Minimum-size 127 x 127 mm (5 x 5 inches)
60 to 90 gm
2
(16 to 24 lb)
50 sheets
Maximum-size 216 x 381 mm (8.5 x
15 inches)
NOTE: When faxing, copying, or scanning using the product, use the flatbed scanner if the original is
fragile, thin, thick, too small for the ADF, or a photograph. Also use the flatbed scanner for the fit-to-
page copying feature. The flatbed scanner provides the best fax, copy, and scan resolution.
Media to avoid
The product can handle many types of media. Using media that is outside the specifications degrades
print quality and increases the chance of jams occurring.
●
Do not use media that is too rough.
●
Do not use media that contains cutouts or perforations other than standard 3-hole punched paper.
●
Do not use multipart forms.
●
Do not use paper that contains a watermark if you are printing solid patterns.
Media that can damage the product
In rare circumstances, media can damage the product. Avoid the following types of media to prevent
possible damage:
●
Do not use media with staples attached.
●
Do not use transparencies designed for inkjet printers or other low-temperature printers. Use only
transparencies that are specified for use with HP LaserJet printers.
●
Do not use photo paper intended for inkjet printers.
ENWW Media specifications 17
To Next Page
Loading...