●
Do not use paper that is embossed or coated and is not designed for the temperature of the image-
fuser. Select media that can tolerate temperatures of 200°C (392°F) for 0.1 second.
HP manufactures a media that is designed for the product.
●
Do not use letterhead paper that was produced with low-temperature dyes or thermography.
Preprinted forms or letterhead must use inks that can tolerate temperatures of 200°C (392°F) for
0.1 second.
●
Do not use any media that produces emissions, or that melts, offsets, or discolors when exposed
to 200°C (392°F) for 0.1 second.
To order HP LaserJet printing supplies, go to
www.hp.com/go/ljsupplies in the U.S., or go to
www.hp.com/go/ljsupplies worldwide.
18 Chapter 1 Product information ENWW
To Next Page
Loading...