Manage the product
HP ToolboxFX
The HP ToolboxFX is a Web-based program that you can use to complete the following tasks:
●
Check the product status.
●
Configure the product settings.
●
View problem-solving information.
●
View online documentation.
You can view the HP ToolboxFX when the product is directly connected to your computer or when it is
connected to the network. You must perform a typical software installation to use HP ToolboxFX.
NOTE: The HP ToolboxFX is not supported for Windows 98 SE or Macintosh operating systems. To
use the HP ToolboxFX, the TCP/IP protocol must be installed on the computer. You do not have to have
Internet access to open and use the HP ToolboxFX.
View the HP ToolboxFX
Open the HP ToolboxFX in one of these ways:
●
In the Windows system tray or on the desktop, double-click the HP ToolboxFX icon.
●
On the Windows Start menu, click Programs (or All Programs in Windows XP), click HP, click
HP LaserJet M2727, and then click HP ToolboxFX.
The HP ToolboxFX software contains the following tabs, and the information about each tab is on the
specified page:
●
Status on page 58
●
Alerts on page 59
●
Fax on page 59
●
Help (Documentation) on page 62
●
System settings on page 63
●
Print settings on page 65
●
Network settings on page 66
Status
The HP ToolboxFX Status tab contains links to the following main pages:
●
Device Status. View product status information. This page indicates product conditions such as
a jam or an empty tray. After you correct a problem with the product, click Refresh Status to update
the product status.
●
Supplies Status. View detailed supplies status, such as the estimated percentage of toner
remaining in the print cartridge and the number of pages that have been printed with the current
print cartridge. This page also has links to order supplies and to find recycling information.
58 Chapter 3 Maintenance ENWW
To Next Page
Loading...