5 Connectivity
●
Connect the product directly to a computer with USB
●
Printer sharing disclaimer
●
Supported network operating systems
●
Supported network protocols
●
Install the product on a network
●
Configure the network product
NOTE: Configuring TCP/IP settings is complicated and should be performed only by experienced
network administrators. BOOTP will require a server to configure specific TCP/IP settings for the
product. DHCP will also require a server, but the TCP/IP settings will not be fixed for the product. Finally,
the manual method to configure specific TCP/IP settings can be done from the control panel, the
embedded Web server, HP ToolboxFX, or HP Web Jetadmin. For additional help or network
configuration, contact your network provider.
ENWW 37
To Next Page
Loading...
