11
English
English
32) Open a web browser. 33) Type the device IP address (found on the Jetdirect
configuration page). 34) Select the Digital Sending tab. 35) Complete General
Settings information, such as name and e-mail address.
36) Select E-mail Settings from the left navigation menu. 37) Type the SMTP server
address. Note: If you are using an Internet Service Provider (ISP) for Internet access
and e-mail you might need to contact your ISP to obtain the SMTP server name, and
to determine if you need to enter an account name and password for SMTP
authentication.
38) Select The E-mail Address Book from the left navigation area to enter
frequently-used e-mail addresses and e-mail distribution lists.
For the M5035 MFP only. 39) To scan a document to your computer or shared
network folder, use the Send To Folder feature (on the left navigation bar) to set up
one or more folder destinations. Note: See the embedded Web server (EWS) guide
for more information on configuring the Send To Folder feature.
• Set up digital send
To Next Page
Loading...