6
15) Turn on the device. 16) Wait for the device to initialize (this might take a few minutes). If you are
prompted at the control panel, enter the language, date, and time.
17) If you are connected to a network, print a test page from the control panel and
check for a valid IP Address. On the control panel, touch the Network Address
button, and then touch Print. The IP address information appears below “TCP/IP”. If
your IP address information appears, go to step 19 on page 7.
Note: Many networks provide IP addresses automatically. If the IP address shows a
series of zeros, make sure that you are connected to the network and go to step 18.
• Set up the control panel
To Next Page
Loading...