HP LASERJET M575 - Page 136

Rear-top cover
Before proceeding, remove the following components:
●
Stapler cover. See
Stapler cover on page 85.
●
Rear-upper cover. See
Rear-upper cover on page 95.
●
Left-upper cover. See
Left-upper cover on page 97.
●
Rear cover. See
Rear cover on page 98.
●
Delivery cover. See
Delivery cover on page 104.
●
Front-top cover. See
Front-top cover on page 110.
●
Document feeder whole unit.
◦
See
Document feeder whole unit on page 127.
◦
See
Document feeder whole unit (M575c model) on page 130.
●
Scanner-control board (SCB).
◦
See
Scanner-control board (SCB) on page 133.
◦
See
Scanner-control board (SCB; M575c) on page 136.
●
Image scanner whole unit. See
Image scanner whole unit on page 139.
Remove the rear-top cover
1. Release the wire harness from its retainers (callout 1), and disconnect the cable (callout 2).
Figure 1-164 Remove the rear-top cover (1 of 2)
1
2
112 Chapter 1 Removal and replacement ENWW