Residual-toner-feed motor
Before proceeding, remove the following components:
●
Toner-collection unit. See
Toner-collection unit on page 15.
●
Intermediate transfer belt (ITB). See
Intermediate transfer belt (ITB) on page 34.
●
Left cover. See
Left cover on page 92.
Remove the residual-toner-feed motor
NOTE: Be careful. Do not dislodge the residual-toner collection door when you remove the assembly.
If the door becomes dislodged, see
Reinstall the residual-toner collection door on page 170 to reinstall
it.
1. Release one tab (callout 1) while you support the cover (callout 2).
Figure 1-241 Remove the residual-toner-feed motor (1 of 7)
1
2
166 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...