4. Support the assembly, and then remove two screws (callout 1).
Figure 1-244 Remove the residual-toner-feed motor (4 of 7)
1
5. Be careful. Do not dislodge the residual-toner collection door when you remove the assembly. If
the door becomes dislodged, see
Reinstall the residual-toner collection door on page 170 to
reinstall it.
Figure 1-245 Remove the residual-toner-feed motor (5 of 7)
168 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...