Optional paper feeder assembly (Tray 3)
NOTE: For information about removing the Tray 3 pickup roller, see Pickup and feed rollers (Tray 3)
on page 29.
For information about removing the Tray 3, see
Tray 2 and 3 on page 23.
For information about removing the right door (optional paper feeder), see
Right door (optional paper
feeder) on page 78.
Drawer connector
1. With a small screwdriver, lift one tab and then slide the drawer connector to release.
2. Remove one connector (callout 1).
Figure 1-368 Remove the drawer connector; optional paper feeder
1
ENWW
Removal and replacement procedures
251
To Next Page
Loading...