Pickup roller (Tray 2)
CAUTION: Skin oils on the roller can cause paper pickup problems. Wash your hands before
removing the roller.
1. Look up into the Tray 2 cavity (where the tray would be installed), and pull down to release the
blue roller-locking lever.
Reinstallation tip When the roller is reinstalled, rotate the roller shaft several times to make
sure that the shaft correctly engages the drive mechanism. You should hear a click when the shaft
engages the drive mechanism.
Figure 1-28 Remove the pickup roller (Tray 2; 1 of 4)
2. Pull the roller toward the front of the product to release the rear of the roller shaft.
Figure 1-29 Remove the pickup roller (Tray 2; 2 of 4)
ENWW
Removal and replacement procedures
27
To Next Page
Loading...