Pickup and feed rollers (Tray 3)
CAUTION: Skin oils on the roller can cause paper pickup problems. Wash your hands before
removing the rollers.
1. Locate the Tray 3 pickup and feed rollers.
TIP: The feeder is shown front side up in this procedure for clarity. You do not have to separate
the product from the feeder to remove these rollers. Remove the tray, and then reach up into the
cavity to remove the rollers.
Figure 1-32 Remove the Pickup and feed rollers (Tray 3; 1 of 2)
ENWW
Removal and replacement procedures
29
To Next Page
Loading...