6. Rotate the top of the keyboard away from the tray, and then slide it up to release it.
NOTE: The keyboard is still attached to the tray. Do not attempt to completely remove it.
TIP: Push your finger through the hole provided in the back side of the tray to lift the keyboard.
Figure 1-105 Remove the keyboard assembly (6 of 7)
1
2
7. Thread the FFC though the hole in the tray, and then remove the keyboard.
Figure 1-106 Remove the keyboard assembly (7 of 7)
ENWW
Removal and replacement procedures
71
To Next Page
Loading...