44 Chapter 2 Faxing ENWW
Receiving faxes
When the fax accessory receives incoming faxes, it stores them in
memory before printing. Once the entire fax is stored, it is printed
and then deleted from memory. Faxes print when received, unless
Schedule Printing of Faxes is enabled. If Schedule Printing of Faxes
is enabled, all incoming faxes are stored in memory and not printed.
When Schedule Printing of Faxes is disabled, all stored faxes print.
For more information, see “Scheduling fax printing (memory lock)” on
page 61.
You can change the fax receive default settings to modify the way a
fax is received. These settings include:
● Selecting the number of rings-to-answer
● Printing date, time, and page number on faxes (stamp)
● Selecting input paper tray and destination bin
● Forwarding faxes to another number
● Blocking faxes from certain numbers
● Schedule the printing of faxes (memory lock)
For information on changing these menu settings, see Chapter 3,
“Configuration” on page 45 and Chapter 4 “Faxing (advanced)” on
page 59.
Note You cannot cancel incoming faxes.
To Next Page
Loading...
