HP LaserJet MFP - Scheduling fax printing (memory lock)

ENWW Setting a dialing prefix 53
English
5 Touch OFF (default) to disable dial tone detection, or touch ON to
enable dial tone detection.
Setting a dialing prefix
The dialing prefix setting allows you to enter a prefix number (such as
a “9” to access an outside line) when dialing. This prefix number is
automatically added to all phone numbers when dialed.
To set a dialing prefix, perform the following steps.
Note You may need a pause between the prefix and the phone number. To
insert a two second pause, enter a comma (,).
1 On the control panel, press the Menu button to display the main
menu.
2 Touch FAX to display the fax menu.
3 Scroll down and touch FAX SEND.
4 Scroll down and touch DIAL PREFIX to display the prefix
settings.
5 Touch OFF (default) to disable dialing prefix, or touch CUSTOM
to display the keyboard, and type a prefix.
6 Type the prefix number(s), and then touch OK.
Setting billing codes
The billing code setting, when enabled, prompts the user to enter a
number when sending a fax. This number is placed in the billing code
report. To view the billing code report, you can either print the report,
see “Printing the billing code report” on page 67, or query it using an
application.
To set billing codes, perform the following steps.
1 On the control panel, press the Menu button to display the main
menu.
2 Touch FAX to display the fax menu.
3 Scroll down and touch FAX SEND to display the Fax Send
settings.
4 Scroll down and touch BILLING CODE to display the billing code
settings.