Mac OS X 10.4
a. From the Apple menu
, click the System Preferences menu, and then click the Print &
Fax icon.
b. Click the Printer Setup button.
Mac OS X 10.5 and 10.6
a. From the Apple menu
, click the System Preferences menu, and then click the Print &
Fax icon.
b. Select the product in the left side of the window.
c. Click the Options & Supplies button.
d. Click the Driver tab.
4. In the Cleaning Page area, click the Start button to process the cleaning page.
NOTE: The cleaning process takes about 2 minutes. The cleaning page stops periodically during the
cleaning process. Do not turn the product off until the cleaning process has finished. You might need to
repeat the cleaning process several times to thoroughly clean the product.
Configuration page
The configuration page lists current product settings and properties. It also contains a status log report.
To print a configuration page, do the following:
Both models
1. Open the printer driver, and then click the Properties or Preferences button.
2. Click the Services tab, and then, in the Print Information Pages drop-down list, click the Config
Page list item.
3. Click the Print button.
HP LaserJet Professional M1130 MFP series
At the control panel, press and hold the Cancel
button until the Ready light starts blinking, and
then release the button.
HP LaserJet Professional M1210 MFP series
1. On the product control panel, press the Setup
button.
2. Use the arrow buttons to select the Reports menu, and then press the OK button.
3. Use the arrow buttons to select the Config report option, and then press the OK button.
118 Chapter 2 Solve problems ENWW
To Next Page
Loading...
