Separation pad
CAUTION: Do not touch the sponge portion of the pad. Skin oils can cause paper handling problems.
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 21.
Product base separation pad
1. Place the product rear-side up to access the separation pad assembly.
CAUTION: Dirt and debris can scratch the product covers. Place the product on a cloth or other
clean surface.
2. Remove two screws (callout 1) and then remove the separation pad assembly (callout 2).
Figure 1-12 Remove the product base separation pad assembly
1
2
ENWW Separation pad 13
To Next Page
Loading...