5. Push down on the assembly until the pins reach the bottom of the slot in the ADF core, and then
slightly slide the assembly toward the left side of the product to engage the locking pins in the
closed slot. Release the assembly.
CAUTION: The pins on the assembly are fragile and can easily be broken off. Do not force the
assembly into place, or the pins might break.
TIP: You might need to slightly tip the assembly and engage one pin, and then tip the assembly
in the opposite direction to engage the second pin.
Figure 1-21 Reinstall the ADF separation pad assembly (5 of 5)
18 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...