Cartridge door
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 21.
●
Left cover. See
Left cover on page 22.
●
Right cover. See
Right cover on page 25.
●
Front cover. See
Front cover on page 28.
●
Scanner assembly. See
Scanner assembly on page 30.
Remove the cartridge door
1. Open the cartridge door. Carefully push up on the right corner of the door to release the right-side
retainer.
CAUTION: The retainer is still attached to the door. This step only releases the door-stop tab of
the retainer.
Reinstallation tip When the door is reinstalled, you must push down on the retainer to reengage
the door-stop tab, or the cartridge door cannot close.
Figure 1-47 Remove the cartridge door (1 of 5)
ENWW Covers 33
To Next Page
Loading...