ADF core
NOTE: HP LaserJet Professional M1210 MFP series only.
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 21.
●
Scanner assembly. See
Scanner assembly on page 30.
●
ADF top cover. See
ADF top cover on page 43.
Remove the ADF core
1. Carefully feed the wire harness (callout 1) through the slot in the ADF chassis (callout 2).
Figure 1-65 Remove the ADF core (1 of 5)
1
2
ENWW Scanner components 45
To Next Page
Loading...