HP LaserJet Pro M1130 - Multifunction Printer - Page 71

ADF base or scanner assembly lid
NOTE: For the HP LaserJet Professional M1130 MFP series, use this procedure to remove the
scanner assembly lid (see to step 1 below).
For the HP LaserJet Professional M1210 MFP series, use this procedure to remove the ADF base.
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 21.
●
Scanner assembly (HP LaserJet Professional M1210 MFP series only). See
Scanner assembly
on page 30.
●
ADF top cover (HP LaserJet Professional M1210 MFP series only). See
ADF top cover
on page 43.
●
ADF core (HP LaserJet Professional M1210 MFP series only). See
ADF core on page 45.
●
ADF tray (HP LaserJet Professional M1210 MFP series only). See
ADF tray on page 48.
Remove the ADF base or scanner assembly lid
1. Open the ADF base or scanner assembly lid.
Figure 1-74 Remove the ADF base or scanner assembly lid (1 of 3)
ENWW Scanner components 51