HP LaserJet Pro M1130 - Multifunction Printer - Page 73

Scanner assembly bezel
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 21.
●
Scanner assembly (HP LaserJet Professional M1210 MFP series only). See
Scanner assembly
on page 30.
●
ADF top cover (HP LaserJet Professional M1210 MFP series only). See
ADF top cover
on page 43.
●
ADF core (HP LaserJet Professional M1210 MFP series only). See
ADF core on page 45.
●
ADF tray (HP LaserJet Professional M1210 MFP series only). See
ADF tray on page 48.
●
ADF base or scanner assembly lid. See
ADF base or scanner assembly lid on page 51.
Remove the scanner assembly bezel
CAUTION: The components inside of the scanner assembly are not captive when the bezel is
removed.
Remove six screws (callout 1), and then remove the bezel.
Figure 1-77 Remove the scanner assembly bezel (1 of 2; HP LaserJet Professional M1130 MFP series)
1
ENWW Scanner components 53