Power switch assembly
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 21.
●
Left cover. See
Left cover on page 22.
Remove the power switch assembly
1. Disconnect one connector (callout 1).
Figure 1-94 Remove the power switch assembly (1 of 3)
1
2. Release one tab (callout 1), and then slide the assembly up and away from the product to release
it.
Figure 1-95 Remove the power switch assembly (2 of 3)
1
66 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...