Copy two-sided documents manually
1. On the product control panel, press the Copy
Menu
button.
2. Use the arrow buttons to select the Multi-
Page Copy item, and then press the OK
button.
3. Use the arrow buttons to select the On
option, and then press the OK button to save
the selection.
NOTE: The factory-set default for
automatic copy collation is On.
4. Load the first page of the document on the
flatbed scanner.
5. Press the Start Copy button.
6. Remove the printed page from the output
bin, and then place that page in Tray 1 with
the top edge leading into the product and
with the printed side facing down.
7. Remove the first page, and then load the
second page onto the flatbed scanner.
8 Quick Reference Guide ENWW
To Next Page
Loading...
