Load the Priority input tray
Introduction
The following information describes how to load paper in the Priority input tray. This tray holds up to 10 sheets
of 75 g/m
2
(20 lb) paper.
NOTE: To avoid paper jams:
●
Never add or remove paper from the Priority input tray during printing.
●
Before loading the tray, remove all of the paper from the input tray and straighten the stack.
●
When loading the tray, do not fan the paper.
● Use paper that is not wrinkled, folded, or damaged.
1. Open the Main input tray door by grasping the
handle and pulling down.
2. Spread the paper-width guides to the correct size.
12 Chapter 2 Paper trays ENWW
To Next Page
Loading...