Enable or disable the Cartridge Protection feature
Use the HP Embedded Web Server (EWS) to enable the Cartridge Protection feature
1. Open the HP EWS.
a. Print a configuration page to determine the IP address or host name.
i.
Press and hold the Resume
button until the Ready light begins blinking.
ii.
Release the Resume
button.
b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays
on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the displays a message indicating that accessing the website might not be safe, select the
option to continue to the website. Accessing this website will not harm the computer.
2. Click the System tab.
3. From the left navigation pane, select Supply Settings.
4. From the Cartridge Protection drop-down list, select Protect Cartridges.
5. Click the Apply button.
CAUTION: After enabling cartridge protection for the printer, all subsequent toner cartridges installed
in the printer are automatically and permanently protected. To avoid protecting a new cartridge, disable
the Cartridge Protection feature before installing the new cartridge.
Turning the feature off does not turn off protection for cartridges that are currently installed.
Use the HP Embedded Web Server (EWS) to disable the Cartridge Protection feature
1. Open the HP EWS.
a. Print a configuration page to determine the IP address or host name.
i.
Press and hold the Resume
button until the Ready light begins blinking.
ii.
Release the Resume
button.
b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays
on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the displays a message indicating that accessing the website might not be safe, select the
option to continue to the website. Accessing this website will not harm the computer.
2. Click the System tab.
3. From the left navigation pane, select Supply Settings.
ENWW Configure the HP toner-cartridge-protection supply settings 27
To Next Page
Loading...