HP LaserJet Pro M203

To Next Page

To Previous Page

Network-connected printers

a. Print a configuration page to determine the IP address or host name.

Press and hold the Resume

button until the Ready light begins blinking.

ii.

Release the Resume

button.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays

on the printer configuration page. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be

safe, select the option to continue to the website. Accessing this website will not harm the computer.

2. Click the System tab, and then select the Energy Settings page.

3. From the Sleep/Auto Off After Inactivity drop-down, select the time for the delay.

4. Click the Apply button.

Set the Shut Down After Inactivity delay and configure the printer to use 1 watt or

less of power

Use the EWS to set the amount of time before the printer shuts down.

NOTE: After the printer shuts down, the power consumption is 1 watt or less.

Complete the following procedure to change the Shut Down After Delay setting:

1. Open the HP Embedded Web Server (EWS):

Direct-connected printers

a. Open the HP Printer Assistant.

● Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the

printer name.

● Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and

then select the printer name.

● Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select

All Programs, click HP, click the folder for the printer, select the icon with the printer's name,

and then open HP Printer Assistant.

b. In the HP Printer Assistant, select Print, and then select HP Device Toolbox.