Tab or section Description
System tab
Provides the ability to configure the
printer from your computer.
●
Device Information: Provides basic printer and company information.
●
Paper Setup: Change the default paper-handling settings for the printer.
● Print Quality: Change the default print-quality settings for the printer.
● Energy Settings: Change the default times for entering Sleep/Auto Off mode or automatic
shut down.
● Job Storage Setup: Configure the job storage settings for the printer.
(Job storage printers only)
●
Paper Types: Configure print modes that correspond to the paper types that the printer
accepts.
● System Setup: Change the system defaults for the printer.
●
Supply Settings: Change the settings for Cartridge is low alerts and other supplies
information.
● Service: Perform the cleaning procedure on the printer.
●
Save and Restore: Save the current settings for the printer to a file on the computer. Use
this file to load the same settings onto another printer or to restore these settings to this
printer at a later time.
●
Administration: Set or change the printer password. Enable or disable printer features.
NOTE: The System tab can be password-protected. If this printer is on a network, always
consult with the administrator before changing settings on this tab.
Print tab
Provides the ability to change default
print settings from your computer.
● Printing: Change the default printer print settings, such as number of copies and paper
orientation. These are the same options that are available on the control panel.
●
PostScript: Turn off or on the Print PS Errors feature.
Fax tab
(Fax printers only)
●
Receive Options: Configure how the printer handles incoming faxes.
●
Phone Book: Add or delete entries in the fax phone book.
● Junk Fax List: Set fax numbers to block from sending faxes to the printer.
●
Fax Activity Log: Review recent fax activity for the printer.
Scan tab
(MFP printers only)
Configure the Scan to Network Folder and Scan to E-mail features.
●
Network Folder Setup: Configure folders on the network to which the printer can save a
scanned file.
●
Scan to E-mail Setup: Begin the process to set up the Scan to E-mail feature.
● Outgoing E-mail Profiles
: Set an email address that will appear as the “from” address for
all emails sent from the printer.
●
E-mail Address Book: Add or delete entries in the email address book.
● E-mail Options: Configure a default subject line and body text. Configure default scan
settings for emails.
Copy tab
(MFP printers only)
Use this tab to set up the default copy settings.
ENWW Advanced configuration with HP Embedded Web Server (EWS) and HP Device Toolbox (Windows) 55
To Next Page
Loading...