HP LASERJET PRO M251nw - Page 66

Intermediate transfer belt (ITB)
1. Remove the following components:
●
Toner-cartridge drawer. See
Toner-cartridge drawer on page 14.
●
Right cover. See
Right cover on page 15.
●
Left cover. See
Left cover on page 18.
●
Rear-right cover. See
Rear right cover on page 21.
●
Rear door and rear lower cover. See
Rear door and rear lower cover on page 23.
2. Disconnect one connector (callout 1).
Figure 1-60 Remove the ITB (1 of 3)
1
52 Chapter 1 Removal and replacement ENWW