HP LaserJet Pro M402 series

Load Tray 1
Introduction
The following information describes how to load paper in Tray 1. This tray holds up to 100 sheets of 75 g/m
2
(20 lb) paper.
CAUTION: To avoid paper jams, never add or remove paper from Tray 1 during printing.
1. Open Tray 1 by grasping the handles on the left
and right side of the tray and pulling down.
HEWLETT-PACKARD
2
2. Slide out the tray extension.
HEWLETT-PACKARD
2
14 Chapter 2 Paper trays ENWW