Load Tray 2
Introduction
The following information describes how to load paper in Tray 2 . This tray holds up to 250 sheets of 75 g/m
2
(20 lb) paper.
CAUTION: Do not print envelopes, labels, or unsupported sizes of paper from Tray 2. Print these types of
paper only from Tray 1.
1. Pull the tray out and lift up slightly to remove it
completely from the printer.
NOTE: Do not open the tray while it is in use.
2. Adjust the paper-width guides by squeezing the
adjustment latch on the left guide and sliding the
guides to the size of the paper being used.
To Next Page
Loading...