HP LaserJet Pro M402 series

Mobile printing
Introduction
HP oers multiple mobile and ePrint solutions to enable easy printing to an HP printer from a laptop, tablet,
smartphone, or other mobile device. To see the full list and to determine the best choice, go to
www.hp.com/go/LaserJetMobilePrinting.
●
Wi-Fi Direct and NFC Printing (wireless models only)
●
HP ePrint via email
●
HP ePrint software
●
AirPrint
●
Android embedded printing
Wi-Fi Direct and NFC Printing (wireless models only)
Wi-Fi Direct, and NFC (Near Field Communication) printing enable Wi-Fi capable (mobile) devices to make a
wireless network connection directly to the printer without using a wireless router.
Wi-Fi Direct and NFC enable printing from a wireless mobile device without requiring a connection to a
network or the Internet. NFC capabilities enable easy one-to-one print connection for mobile devices using
device-to-device touch.
NOTE: Not all mobile operating systems are currently supported by Wi-Fi Direct and NFC.
Use Wi-Fi Direct to print wirelessly from the following devices:
●
Android mobile devices compatible with the Android embedded print solution
For more information on Wi-Fi Direct printing, go to www.hp.com/go/wirelessprinting.
NFC and Wi-Fi Direct capabilities can be enabled or disabled from the printer’s control panel.
Enable or disable Wi-Fi Direct
Wi-Fi Direct capabilities must be enabled rst from the printer control panel.
1. On the printer control panel, press the OK button.
2. Open the following menus:
●
Network Setup
●
Wi-Fi Direct
●
On/O
3. Select the On menu item. Selecting the O item disables Wi-Fi Direct printing.
46 Chapter 4 Print ENWW