e. Select Paper Type and then select the type of paper that is in the tray.
f. Select Paper Size and then select the size of paper that is in the tray.
3. Turn the printer off, wait 30 seconds, and then turn it on again.
4. Print a cleaning page to remove excess toner from inside the printer.
a. 2-line control panels: On the printer control panel, press the OK button.
Touchscreen control panels: From the Home screen on the printer control panel, touch the Setup
button.
b. Open the Service menu.
c. Select Cleaning Page.
d. Load plain letter or A4 paper when you are prompted.
e. Touch the OK button to begin the cleaning process.
The printer prints the first side and then prompts you to remove the page from the output bin and
reload it in Tray 1, keeping the same orientation. Wait until the process is complete. Discard the
page that prints.
5. Print a configuration page to test the printer.
a. 2-line control panels: On the printer control panel, press the OK button.
Touchscreen control panels: From the Home screen on the printer control panel, touch the Setup
button.
92 Chapter 6 Solve problems ENWW
To Next Page
Loading...