Configure IP network settings
Introduction
Use the following sections to configure the printer network settings.
●
Printer sharing disclaimer
●
View or change network settings
●
Rename the printer on a network
●
Manually configure IPv4 TCP/IP parameters from the control panel
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems
and not of the HP printer drivers. Go to Microsoft at
www.microsoft.com.
View or change network settings
Use the HP Embedded Web Server to view or change IP configuration settings.
NOTE: The steps vary according to the type of control panel.
1. Open the HP Embedded Web Server (EWS):
a. 2-line control panels: On the printer control panel, press the OK button. Open the Network Setup
menu, and then select Show IP Address to display the IP address or host name.
Touchscreen control panels: From the Home screen on the printer control panel, touch the
Connection Information
button, and then touch the Network Connected button or
the Network Wi-Fi ON
button to display the IP address or host name.
66 Chapter 5 Manage the product ENWW
To Next Page
Loading...