5. Make sure the tray is not overfilled by checking the stack-height markings inside the tray. If it is
overfilled, remove the entire stack of paper from the tray, straighten the stack, and then return some of
the paper to the tray.
The following images show examples of the stack-height markings in the trays for various printers.
Most HP printers have markings similar to these. Also make sure that all sheets of paper are below the
tabs near the stack-height marks. These tabs help hold the paper in the correct position as it enters the
printer.
Figure 6-6 Stack-height markings
Figure 6-7 Tab for the paper stack
ENWW Product does not pick up paper or misfeeds 89
To Next Page
Loading...