HP LaserJet Pro MFP M225 - Page 134

Document feeder base assembly
Before proceeding, remove the following components:
●
Document feeder cover. See Document feeder cover on page 106.
●
Document feeder core. See Document feeder core assembly on page 110.
Remove the document feeder base assembly
1. Remove two screws (callout 1).
Figure 1-174 Remove the document feeder base assembly (1 of 4)
1
2. Open the document feeder base (callout 1) to the upright position.
Figure 1-175 Remove the document feeder base assembly (2 of 4)
1
114 Chapter 1 Removal and replacement ENWW