HP LaserJet Pro MFP M225 - Page 41

Duplex frame, duplex product
Before proceeding, remove the following components:
●
Left cover. See Left cover, duplex product on page 12.
●
Right cover. See Right cover, duplex product on page 16.
●
Top cover cap (duplex models). See Top cover cap, duplex product on page 14.
●
Duplex door. See Duplex door, duplex product on page 20.
Remove the duplex frame
1. Release two tabs (callout 1), and then remove the duplex reverse guide (callout 2).
Figure 1-24 Remove the duplex frame (1 of 2)
1
2
ENWW Removal and replacement procedures 21