HP LaserJet Pro MFP M225 - Page 85

Figure 1-91 Fuser film assembly right side detail
1
3
4
Table 1-4 Fuser film assembly components
Item Description
1 Left and right springs
2 Left pressure release lever
3 Right pressure release lever
4 Left and right pressure plates
6. Remove two springs (callout 1).
7. Remove one left pressure release lever (callout 2).
8. Remove one right pressure release lever (callout 3).
9. Remove two pressure plates (callout 4).
10. Remove the fuser film assembly (callout 1).
Figure 1-92 Remove the fuser film assembly (4 of 4)
1
The shape of the pressure release lever is different between the products.
ENWW Removal and replacement procedures 65